The Tiptop MIXZ Mixer is a low cost multichannel mixer modules for the modular synthesizer. At its heart are low noise summing stages that are made to mix audio, CV, and gate signals with excellent llinarity. The MIXZ has two 4 Channel Mixers available on the front panel plus multichannel mixer that uses the tiptop Bus Mis connected through the power bus board and is enabled into Mixer B using the Bus Mix toggle switch. The Bus Mix is a technology we have developed to mix signals coming frommodules without the use of patch cables to physically connect them to the mixer.This is done by sending the signal through the bus board and picking them upby the MIXZ. At this moment this manual is being written the modules that haveBus Mix are all of the Tiptop drum modules. You can decide which modulesyou want to connect to the Bus Mix and which not, at the back of each of thedrum modules there is a 2 or 3 pin header, enabling this header by placing thejumper to cover both pins will connect this output to the bus. The Bus Mix letsyou turn on and off a mix of drum sounds with a flip of a switch.
|Gross Shipping Weight - Volumetric (kgs)||0.5000|
|Module Width (HP)||10HP|